Feugiat nulla facilisis at vero eros et curt accumsan et iusto odio dignissim qui blandit praesent luptatum zzril.
+ (123) 1800-453-1546

Related Posts


Roofing Company in Savage MN | What are Common Roof Types?

Roofing Company in Savage MNRoofs are an important detail that can make or break a building. Roofs can help to protect your home from the elements, but they also add character and style to your home. With so many different options available in terms of roofing materials and styles, it’s important to know what types of roofs are most common before you hire a contractor. Roofing Company in Savage MN

Gabled Roofs

Gabled roofs are the most common type of roof in the United States. The gable is a triangular-shaped wall that extends from the ridge of a roof and provides an area for chimneys, vents, and other architectural features. These types of roofs have many variations, but they’re usually made out of wood or other materials like steel or aluminum. You’ll often see gabled roofs on houses or buildings with multiple stories because they make it easy to add additional rooms without increasing overall height.

Gabled roofs need regular maintenance to keep them in good condition, including replacing damaged shingles and repairing any leaks at your home’s eaves that could cause rot damage over time if not fixed right away. Hire a professional contractor in your area for roof repair today!

Hipped Roofs

A hipped roof is a type of roof that has four sloping sides, with no gables or hips. It’s called a mono-pitch because it has only one pitch (or slope). The pitch of this type of roof is usually between 12 and 45 degrees, which means that all four sides will be the same height at their lowest point.

This type of roof has four sides and two pitches: one on each side where it meets each wall, and another at the top where it meets other parts of your house.

Gambrel Roofs

The term “gambrel” refers to a type of roof where the lower slope is steeper than the upper slope. In this case, both slopes are sloped with a rise-to-run ratio between 1:2 and 1:3. The lower slope is also called a “rafter gable,” while the upper portion is referred to as an “upper gable.”

Gambrel roofs are commonly used for barns and other buildings that need to be large yet have a low profile to fit into their surroundings without being obtrusive. They’re also used for houses, cottages, and other residential properties that aren’t confined by space limitations like those found in cities or densely populated areas like suburbs or villages.

Mansard Roofs

A mansard roof is a four-sided gambrel roof with two slopes on each of its sides. The lower slope on the two sides is much steeper than the upper slope, and this can be called a “mansard” or “pitch”. The upper portion is called an eave and has a less steep pitch than the lower portion of the roof.

A gabled roof is also known as a hip roof, which means it has two slopes on each side of your house. Its design looks like an upside-down V shape from above, with one side being longer than the other due to its angle (this is why it’s called “gabled”).

Shuttered or Louvered Gables

Shuttered or louvered gables are a type of gable roof that has shutters or louvers on the sides. The shutters or louvers can be fixed or moveable, depending on what you want to accomplish with your roof design. This type of roof is used in areas where there is a lot of sun and heat because it helps to keep the interior cooler. The straight sides slope down to a single point at the bottom, making it look like half an inch off the ground when viewed from directly above. In some cases, they are sometimes called pyramid roofs because they resemble pyramids that have been cut in half vertically.

Shuttered/louvered gables come in two different styles: flat and hipped (rounded). Flat-style shuttered/louvered gables are built right over the top of another surface like a wall or porch railing; whereas hipped-style shuttered/louvered gables have more than three sides so that they don’t require any additional supports when used as roofs for houses.

Pyramid Hip Roofs

Pyramid hip roofs are similar to hipped roofs in that they have four sides. The only difference is that the ridges of a pyramid hip roof come together at the top to create a smaller area, which resembles a pyramid.

This type of roof can be built with several different materials, including wood and metal. Because of their unique shape and style, these roofs often look best when paired with similarly shaped structures such as windows or doors

Pyramid hip roofs were most commonly used on barns during the 19th century but today they are more commonly seen on homes throughout North America. The popularity of these styles likely stems from their ability to withstand harsh weather conditions while still giving each building its personality because there are so many options available (wood vs aluminum).

Roofing Company in Savage MN

Hopefully, we’ve got you a little more excited about taking on this project. Although it might seem like a daunting task, the truth is that if you have the right tools and knowledge then you can do it. Also keep in mind that even if your roofing job isn’t perfect, all roofs need maintenance from time to time so be sure to reach out to your local contractor! For roofing services, contact us at Capstone Bros. Contracting in Savage, Minnesota.

Roofing Company in Savage MN

Roofing Company in Savage MN

Roofing Company in Savage MN

No Comments
Post a Comment