Siding Repair in Chanhassen MN | How to Repair Your Home’s Damaged Siding?
Refresh the exterior of your house by repairing damaged siding. In this blog, we help you repair your home’s damaged vinyl and wood siding. Note that you can only DIY small-scale damage. If you need help with large-scale Siding Repair in Chanhassen MN, then reach out to Capstone Bros. today.
How to repair damaged vinyl siding
Repairing damaged vinyl siding is fairly simple. To repair vinyl siding, you need these tools and materials:
- Caulk
- Caulk gun
- Foil tape
- Zip tool
- Pry bar
- Exterior paint
You can easily repair the vinyl siding in three simple steps. Here is how you can repair damaged vinyl siding:
Step #1 Remove damaged siding
You need a zip tool to remove the damaged piece of siding. You can easily buy a good quality zip tool from your local home improvement store. Zip tools typically cost anywhere between 10$ and 15$. If you cannot find the tool, you can contact your local siding repair contractor.
Use the zip tool to unhook the bottom piece of the siding. Move the tool along the edge of the siding and pull it out.
Then, use a pry bar to remove any nails that fastened the damaged piece of siding.
Step #2 Place the siding
Use foil tape over the hole on the damaged siding. Move the tape over the back of the damaged piece of siding. Then, carefully place the siding back into place.
Step #3 Apply caulk
Apply a layer of caulk over the foil tape by using a caulk gun. Paint a coat or two of matching exterior paint on the caulk. Then, let the paint dry.
Viola! You have repaired your vinyl siding.
How to repair damaged wood siding
Repairing your home’s damaged wood siding takes only a few basic tools and materials but makes a huge difference in your home’s curb value. Here are the tools and materials you need:
- Hacksaw
- Shims
- Circular saw
- Keyhole saw
- Utility knife
- Pry bar
Here is how you can repair your wood siding:
Step #1 Access the boards
Evaluate the boards to see where you need to make the cuts. Then, cut the nails with a hacksaw to remove rotted boards.
Step #2 Make the cuts Siding Repair in Chanhassen MN
Use a circular saw to make the first cut. Lift the boards by using shims to ensure that you do not cut the surrounding boards.
A circular saw may not be enough to finish the cuts. So, finish the cuts using a keyhole saw. You can also use a utility knife to finish the cuts.
Step #3 Remove rotted boards and install new boards
Use a pry bar to remove the rotted boards. Then install new wood boards. Predrill the nail holes and attach the boards with galvanized box nails.
Viola! You are done.
When to call a professional
When repairing your home’s vinyl or wood siding, it is important to look for damage underneath the siding. Look for signs of mold, mildew, fungus, or moisture as they indicate bigger problems that need a professional siding repair contractor to fix. Any large-scale siding damage requires the help of a professional siding repair or replacement company. At Capstone Bros Contracting, we provide siding repair services in Chanhassen at affordable rates. Get in touch to talk more about siding repair, roof repair, window damage, or storm damage with our experts now!